درج و نمایه سازی مقاله پژوهشگر بافقی در پایگاه استنادی کنفرانسهای کشور
مقاله مهندس احسان فتوحی بافقی، بعد از ارائه در همایش تخصصی و بینالمللی نمکزدایی آبهای شور، لبشور و تصفیهی پساب، در پایگاه استنادی کنفرانسهای کشور درج و نمایهسازی گردید.
لینک ثابت به مقاله: http://www.civilica.com/Paper-DESAL01-DESAL01_012.html
مشخصات ثبت شده برای مقاله به شرح زیر است:
شبیه سازی عددی آب شیرینکنخورشیدی لولهای به منظور بررسی تأثیر دماهای سرد و گرم، هندسهی ظرف آب شور و لبهی آن بر تولید آب شیرین
چکیدهی مقاله: در سال های اخیر به دلیل کمبود آب آشامیدنی سالم در جهان، دانشمندان تحقیقات زیادی بر روی آب شیرینکنهای خورشیدی انجام داده اند. تحقیقات انجام شده بر روی آب شیرینکنهای خوشیدی نشان داده است که این دستگاهها میتوانند بهترین جایگزین برای آب شیرینکنهای متداول باشند. از مهمترین مزایای این آب شیرینکنها میتوان به استفاده از انرژی پاک خورشید، نداشتن هیچ گونه آلودگی و قطعه متحرک اشاره نمود. در این تحقیق با در نظر گرفتن شرایط هوای مرطوب، حالت پایدار و جریان لایهای، انتقال جرم به همراه جابجایی طبیعی در داخل آب شیرینکنخورشیدی لولهای در حالت دو بعدی مورد مطالعه قرار گرفته و از الگوریتم سیمپل برای حل معادلات پیوستگی، مومنتم،انرژی و انتقال جرم استفاده شده است. نتایج حاصل از شبیه سازی عددی نشان میدهند که تولید دستگاه نسبت مستقیم با اختلاف دمای بین دو سطح گرم و سرد خواهد داشت، همچنین در صورتی که تغار آب شور به شکل نیمه استوانه، با زایده کوتاه باشد، تولید آب شیرینکن افزایش مییابد.
واژههای کلیدی: آب شیرینکن خورشیدی لولهای، الگوریتم سیمپل، مدلسازی عددی، تأثیر شکل ظرف
The Effects of Thermal Condition and Trough Geometry on the Water Productivity in a Tubular Solar Still – A Numerical Study
Ehsan Fotouhi Bafghi[1]
Department of Mechanical Engineering, Science and Research Branch, Islamic Azad University, Semnan, Iran; Ehsansytif@gmail.com
Nader Rahbar[2]
Department of Mechanical Engineering, Semnan Branch, Islamic Azad University, Semnan, Iran; Nrahbar@Semnaniau.ac.ir
Javad Abolfazli Esfahani2
Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran; Jaesfahani@gmail.com
Abstract
In this study, an attempt has been made to investigate of the effects of Temperature difference and geometry on the water productivity in a 2-D tubular solar still (TSS). The flow is assumed as steady, laminar and incompressible ideal gas. The Governing equations of mass, momentum, energy and concentration discretized by finite volume method are solved with Fluent 6.3.2. . Moreover the Simple (Semi-Implicit method for pressure linked equations) method is used for coupling the pressure-velocity, while first order Upwind and Standard (Pressure Staggering Option) schemes are employed to discretize the convective terms and pressure interpolation, respectively. The solutions are performed for several values of temperature difference between 4.7-5.35 and different geometries. The results have a good agreement with the results of experimental data and they showed that the increasing of temperature difference has a direct effect on the rate of water production. Moreover, the results showed that semi-circle trough without edge has the maximum water productivity.
[1] M.S. Student of Mechanical Engineering, Corresponding Author
[2] Member of Faculty of Mechanical Engineering
بجای وقت وهزینه کردن برای فوتبال غیرورزشی وغیرسالمباید به فکر نخبه های بافقی بود